KA&MELOCK KM 16 is an elastomer bonding agent suitable for top coat use. It should be used in combination with KA&MELOCK MP 05 primer when high temperature corrosion resistance and dynamic resistance are required for bonding various elastomers to metal and plastic surfaces during the vulcanization process. In some cases, KA&MELOCK KM 16 can be used as a single coat.
Even though coating with KA&MELOCK KM 16 provides good corrosion, oil and solvent resistance, especially corrosion and heat resistance of the part increases when applied together with KA&MELOCK KM 16 + KA&MELOCK MP 05 primer. KA&MELOCK KM 16, Natural rubber (NR), Polyisoprene (IR), Polybutadiene (BR), Styrene butadiene (SBR), Nitrile (NBR), Chloroprene (CR), Butyl (IIR) and Ethylene Propylene (EPDM) based rubber compound adheres to a wide range of metals and plastics during vulcanization process.
The combination of KA&MELOCK MP 05 + KA&MELOCK KM 16 is ideal for soft NBR and NR blends, especially in the production of TM and IM.
Technical Data
|
Colour |
Black – Green Liquid |
|
Viscosity 4 mm DIN-Cup |
80 – 120 s |
|
Viscosity,cps@25°C(77°F) | |
|
200 – 600 mPas | |
|
Brookfield SNB1 | |
|
Specific Gravity |
0,96 – 1,04 g/cm³ |
|
Solid Content |
22 – 26 % by weight |
|
Solvents |
Xylene |
*Data is typical and not to be used for specification purposes.
We believe the accurate testing and analysis is power. As WBKim Kimya, all of our products are tested and recorded in our laboratories. In addition, our R&D studies continue by constantly developing products in our demo facility.
Our elastomer bonding solutions add reliable value to your business, ensuring trouble-free operation in every industry and every application.
KA&MELOCK adhesives are used for single or double layer bonding of compounds to surfaces such as metals, plastics, Teflon and textile fibers during. vulcanization Please have a look at the KA&MELOCK product range.